Fully-Automated Clinical Chemistry Analyzer

• Throughput:Double Reagent : 200 Tests/hour
Single Reagent : 260 Tests/hour
• Random Access with STAT function
• Assay Modes:End Point, Fixed time (2-point),Kinetic Rate-A,Kinetic Rate-B
• Measurement Principle: Photometry
• Sample Positions: Maximum 30 positions with 15 positions flexible for
    reagent in sample tubes
• Reagent Positions: 30 positions for 20 ml bottles
• 60 dismountable, easily replaceable and reusable cuvettes
• 8 wavelengths: 340, 405, 505, 546, 578, 600, 670, 700 nm
• Calibration Points: K-Factor, Linear (one, two and multi point), Logit-log,
   Spline, Exponential, Polynomial (second, third and fourth order) Multipoint
   curves for up to 6 points
• Twin Laundry System, 7-step automatic washing
• Low water consumption of 4 litres / hour
• Easy-to-use Windows based software (XP & 2007)


Innovative Features

AutoQuant200i is a fully automated, random access, patient prioritized analyzer with throughput of 200 tests / hour for double reagent and 260 tests / hour for single reagent, with on board ISE module , making it ideal for small to mid sized laboratory.


Sample and Reagent System - An Art Of Simplicity

AutoQuant 200i is provided with 30 sampling positions with 15 positions flexible for reagent in sample tubes. STAT samples can be placed at any free position. Sampling system is provided with sample cover to avoid contamination and loss of sample or reagent.

Enhanced Lab Efficiency

AutoQuant 200i is equipped with sample and reagent probe with liquid level sensor. Analyzer is programmed with internal and external probe washing. Analyzer is provided with long life pipetting system with plunger, driven by stepper motor and is equipped with vertical and horizontal obstruction detection facility to prevent probe crash.

Reaction Disk Assembly

AutoQuant 200i is provided with 60 dismountable, easily replaceable and reusable cuvettes. Analyzer is equipped with twin laundry and 7- step automatic washing system, with low water consumption of 4 litres / hour.

Optical System

AutoQuant 200i uses Halogen Tungsten lamp, with fibre optics and silicon photo-diode detector. Photometric system of Static filters with 8 wavelengths (340, 405, 505, 546, 578, 600, 670, 700 nm).

Auto Re-run

AutoQuant 200i is programmed with auto execution according to abnormal marking or range over.

Perfect Quality Control Function

Real time quality control based on Multi-rule method. Within day as well as day-to-day X and X-R control diagram (L-J Graphs). Mean, SD, %CV, R is calculated for all parameters for sample replicates.

Data Sorage

• Test results: 1,000,000
• Reaction curve: 40,000 tests
• Profiles: 20 per sample type
Report can be generated as Patient wise, Test wise, Date wise, Doctor/Hospital wise etc.